Service and Repair

Preventative Maintenance Service

Repair Service

¨ Pre-cleaning evaluation and inspection.

¨ Test all components for proper operation.

¨ Disassemble unit as needed.

¨ Clean optics.

¨ Align optics and illumination (includes testing all components for proper operation).

¨ Check to make sure system is parfocal, alignment and resolution.

¨ As needed - remove old lubricant and replace with quality new lubricants.

¨ Check and set for proper illumination technique whenever possible.

¨ Affix service label with date, scope number and next service-due date.

¨ Inspect all mechanics and bearing systems.

¨ Detail all adjustments and repairs with costs on RB Instrument’s Service Report.

¨ Post cleaning inspection.

 

 

 

 

BODY - Clean all components and body exterior.

STAGE ASSEMBLY - Adjust all backlash out of X & Y axis rack and pinion. Insure proper operation of stage and drive. Disassemble, degrease and relubricate, as required.

CONDENSER ASSEMBLY - Disassemble, degrease and relubricate. Adjust rack and pinion. Clean all lenses. Clean iris diaphragm.

BINOCULAR HEAD - Adjust dovetails. Clean eyepieces. Relubricate adjustable eyetube.

OPTICS - Disassemble system and clean all lenses and eyepieces. Clean objective body and lenses (exterior only). Parfocalize and center objective lenses.

ILLUMINATION SYSTEM - Disassemble system and clean all lenses. Clean lamphouse body.

CAMERA /MONITOR - Clean exterior lenses and monitor screen.

ALIGNMENT & FUNCTIONAL TESTS - Align entire optical system. Align illumination system. Align iris diaphragm. Final check instruments for proper operation.                     

RB Instruments         

For All Your Microscope Service Needs!